Product class
Showing 33–48 of 68 results
-
D33 Differential Pressure Transmitter – D-Series
HART Communication, stainless steel enclosure suite for all applicationsD33 Differential Pressure Transmitter – D-Series
The D33 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specifically selected type of manometric liquid. The casing is made of cast aluminium alloy or 316 stainless steel with IP66/67 protection. The design of the casing enables the rotation of the casing by 0-355° relative to the sensor, and a choice of cable direction. The model D33 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar.
Key Features
- Accuracy +-0.1%
- 4-20mA output signal
- Fully HART ® compatible
- Static pressure limit up to 420 bar
- ATEX certified (Intrinsically Safe)
- Gold plated diaphragm option
- Hastelloy C276 wetted parts option
-
D34 Differential Pressure Transmitter – D Series
Designed for gas, ATEX/IECEx certifiedD34 Differential Pressure Transmitter – D Series
The D34 measures the differential pressure of gases. Typical applications include the measurement of blast pressure, chimney draughts or pressure/underpressure in furnace chambers. The transmitter can withstand overpressure up to 1 bar. The housing of the electronic circuit is IP66/67 rated.
Key Features
- High accuracy ±0.1%
- 4-20mA analogue with digital communications
- Fully HART ® compatible
- ATEX certified and IECEx
- Ability to locally configure measuring range
-
D35 Differential Pressure Transmitter – D-Series
Aluminium or stainless steel enclosure, for all applicationsD35 Differential Pressure Transmitter – D-Series
The model D35 Differential Pressure Transmitter comes fitted with two diaphragm seals. It is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar. The D Series SMART Differential Pressure Transmitter is suitable for a wide range of applications for measuring differential pressure, level and flow.
Key Features
- ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe
- High accuracy ±0.1%
- Fully HART ® compatible
- 4-20mA analogue with digital communications
- Fully welded sensor guarantees tightness of oil systems for long term usage
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- Linearisation of output signal on 20 point curve for specific application is available
- Write protection option through DKAP-03 communicator, ‘D-Soft’ program or software using library EDDL
-
D45 SMART Level Transmitter – D Series
For pressurised tanks with no outside accessD45 SMART Level Transmitter – D Series
The D45 Smart Level Transmitter is a probe most suited for measuring the level in pressurised tanks. It is compact yet robust, and is categorised as flameproof and intrinsically safe all with high accuracy. Equipped with a fully welded sensor which guarantees tightness for oil systems, even over long term use.
This probe can be used with a wide range of connections, making it versatile, and is easily configurable with the D-Software.
This digital product is part of a family of SMART transmitters, but this one is most beneficial where there is no external access to a tank.
Key Features
• ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe
• High accuracy ±0.16% • Fully HART ® compatible
• 4-20mA analogue with digital communications
• Fully welded sensor guarantees tightness of oil systems for long term usage
• Programmable range, zero shift, characteristic and damping ratio with local panel keys
-
Analogue Level Probes – DSGE Series
Transmitter suitable for clean water, seawater, sludgeAnalogue Level Probes – DSGE Series
The DSGE-25/16 Hydrostatic Level Probes are designed to measure liquid levels in tanks, deep wells or narrow piezometers. The probe measures liquid levels, based on a simple relationship between the height of the liquid column and the resulting hydrostatic pressure. The pressure measurement is carried out on the level of the separating diaphragm of the immersed probe and is related to atmospheric pressure through a capillary in the cable.
When lowered to the reference level, the probe may either hang freely on the cable or lie on the bottom of the tank. The cable with the capillary can be extended using a standard signal cable. For the cable connection a special DSG cable hanger is recommended.
Key Features
- 4–20 mA output signal proportional to level
- Flush mounted ceramic sensor
- Good long term stability
- Ideal for industrial or marine applications
- Wide range of mounting options
- Low cost installation
- Readouts for control room or plant mounting
-
DMCU900 Control Unit – Ultrasonic
Universal HART Input Control UnitDMCU900 Control Unit – Ultrasonic
The DMCU900 Series Universal Controller provides an interface between Delta Mobrey Ultrasonic Transmitters and operators or control systems.
All models have a large LCD display with push button menu driven programming. Options are available for data logging, with download facility. The DMCU900 provides an intrinsically safe power supply for I.S. transmitters. The wall mount model has a protective hinged lid with clear visibility of the display.
The DMCU900 series provides full functionality for configuration and diagnostics of any Delta Mobrey HART ultrasonic transmitter.
This product, when used in conjunction with Detla Mobrey Ultrasonic level transmitters, can be used to display the level or volume of linear or non-linear tanks, measure open flow for many weirs and flume designs as well as giving high or low alarms for storage tanks.
Key Features
- Controller for use with DMSP400, DMSP500 and DMSP900 series level transmitters via HART comms
- Display measured values, control pumps, actuators and alarms
- Configure Delta Mobrey HART transmitters, access diagnostics
- Single or dual transmitter inputs
- 4-20mA and up to five relay outputs
- Data logging option with SD card slot and RS485 comms
- DC or AC power supply
- Galvanically isolated supply to power Intrinsically Safe transmitters
-
DMSP422, DMSP400 and DMSP500 – Ultrasonic Transmitters
Display for chemical and water treatmentDMSP422, DMSP400 and DMSP500 – Ultrasonic Transmitters
Delta Mobrey’s Ultrasonic Level Transmitters are your cost-effective solution for reliable level measurement instrumentation. The DMSP Series can be used for virtually all level measurements, and are ideal for mounting over liquid surfaces in tanks or open channel flow. Model options offer HART communication, relay outputs and hazardous area certification. All models have LCD display and push button configuration.
Key Features
- Non-contact, continuous measurement of Level, Contents or Open Channel Flow
- Local LCD display and push button menu for parameter display, configuration and diagnostics
- Two wire loop powered 4-20mA with HART® output
- Integral relay output option
- Speed of sound temperature compensation
- Configure to ignore disturbing object false echo
- IP67/68 construction
- Plastic or painted aluminium enclosure
-
GR2/4 Pressure Switch – Compact Series
Minimal space applications in industrial environmentsGR2/4 Pressure Switch – Compact Series
Initially launched in the mid-1990s, the Compact Series of pressure switches has continuously been providing users with a compact, robust and hermetically sealed switch for use in Safe and Hazardous Areas. This pressure switch comes with flying leads or junction box fixings.
Compact switch range designed for installing in tight spaces such as those found in panel applications. (EAC certification is available on request).
Key Features
- Compact and rugged design.
- Hermetically sealed snap switch UL and CSA listed.
- ATEX Flameproof CENELEC EEx d IIC option.
- ATEX—Intrinsically Safe ATEX Ex ia IIC option.
- Weatherproof IP66/NEMA 4.
- Stainless steel body option NEMA 4X rating.
- High over-range models up to 1000 bar / 15,000 psi.
- Ranges available between 0.25—700 bar (4—10,000 psi).
-
Boiler Water Level Controls
All mechanical boiler controls and valvesBoiler Water Level Controls
This family of Boiler Water Level Controls are designed to regulate the flow of feed water into the boiler in proportion to the steam demand by using the change in boiler level as a load indicator. They consist of the following elements:
Modulating Controller:
The Delta Mobrey Modulating Controller is a single element electro-hydraulic control with an electronic feedback, used for controlling the flow of feed water into the boiler. Designed to be used alongside the Delta Mobrey
Vertical Air Break Controls (VABC).Sequencing blowdown valves:
The Delta Mobrey sequencing valve is designed to function as a combined water isolating valve and a sequencing blowdown valve to provide positive purging of the water connection, float chamber and steam connection of a boiler control. The operation of the valve helps to ensure the water port does not become blocked by sediment, mud or debris. It also provides a positive test of the boiler water level control, ensuring that any associated equipment, such as the feedwater pump or valve, and any alarms, cutouts or lockouts operate as expected.
Vertical Air Break Controls
The Delta Mobrey Vertical Air Break Controls (VABC) are a comprehensive range of magnetically operated water level controls for steam boilers. They are designed to meet all requirements for automatic on/off control of boiler feed pump, burner cut out, high and/or low level alarm or any combination of these. Models available with Industrial (NEMA4) or Marine Heads. TÜV approved models are available in chambers and for direct mounting. The Delta Mobrey VABC is a gland-less construction. A primary permanent magnet is attached to the float rod and slides vertically inside a non-magnetic stainless steel centre tube. Movements of the float are transmitted to a secondary magnet in each switch unit.
-
GR3/6 Differential Pressure Switch – Compact Series
Reduced space applications, flying leads or junction box installationGR3/6 Differential Pressure Switch – Compact Series
The GR Series switches are housed in a compact and rugged enclosure making them particularly suitable for panel mounting in harsh environments. All models in the Compact Series come with hermetically sealed switch contacts and flying leads as standard. The GR3 and GR6 Differential Pressure Switch models are suitable for setpoints between -12.5mbar and 10bar with maximum working pressures up to 250bar (EAC certification is available on request).
Key Features
- Compact and rugged design
- Weatherproof IP66/NEMA 4
- ATEX Flameproof CENELEC Ex d IIC option
- Stainless steel body option NEMA 4X rating
- Optional weatherproof, ATEX Ex e, ATEX Ex ia or ATEX – Flameproof Ex d IIC terminal enclosures
- NACE MR-01-75 compatibility
- Ranges available up to 10 bar (160 psi) Static Pressure up to 250 bar (3,500 psi)
Field adjustable
Hermetically sealed snap switch CSA listed
-
Flow Element Series
Orifice plates, venturi & pitot tubesFlow Element Series
The most simple and economic method for a flow measurement of liquids or gases, in either compact or standard sizes, dependening upon the application required. A complete system ready for flow measurement with Pressure and Temperature compensation.
The elements which make up the flow and measurement set are constructed according to ANSI, B16.5/ISO 51
Key Features
• Standard construction material: Carbon Steel, Stainless
Steel. Wide range of exotic material is available according
to the application requirements
• Rating ANSI 300, 600, 900, 1500 or DIN starting from PN6.
• Manufactured from forged piece and completely machined
with fine and uniform tool finish
• Standard 2+2 ½”NPTF pressure taps with plugs at 180° for
universal application on liquid or gasses
• Orifice plate with handle as standard
• Jack screw supplied as standard
• Calculation sheet, dimensional drawing and materials certificates are supplied with the elements as standard
• Flow direction marked when required -
Cooling Tower
Pressure Device AccessoriesCooling Tower
Delta Mobrey’s Cooling Towers are a simple device designed to allow for pressure instruments to operate at excessive temperatures.
-
Expansion Temperature Gauge – GE Series
All stainless steel, direct or remote, made in the EUExpansion Temperature Gauge – GE Series
Manufactured in the EU, using a stainless steel enclosure, the two versions of these gauge can be configured for different industrial applications. For dry applications the product is more standard. However, for industries where the level of vibration needs to be considered this product comes with a fluid filled case.
These two variations make the GE Expansion Temperature Gauge a product that can work with hazardous environments such as chemical and petrochemical, pharmaceutical and nuclear power plants.
-
Bimetal Temperature Gauge – GB Series
Stainless steel, rigid or every angle, made in the EUBimetal Temperature Gauge – GB Series
Stainless steel enclosure and is manufactured in the EU. The BG range is suitable for a wide range of applications in multiple industries where a safety barrier and blow out back are required to give added security.
Key Features
•Nominal Diameter options of 100mm, 125mm and 150mmSt. Steel case.
•With rigid or every angle stem.
•Watertight casing stainless steel execution
•Indication ranges range between -50 to +500 °C
•Version B: made with the traditional criteria of quality and versatility whilst also satisfying the specific needs of delivery and flexibility
•Version S: a very good quality level and offers considerable economic advantages due to updated product modern technologies. -
Diaphragm Seals for Pressure Instruments
Direct/Remote Mount Diaphragm SealsDiaphragm Seals for Pressure Instruments
Complete range of diaphragm seals for application on all our pressure and differential pressure instruments.
-
DG Differential Pressure Gauge – DG range
Single or double diaphragm, 100, 150 All stainless steelDG Differential Pressure Gauge – DG range
The DG diaphragm operated differential pressure gauges offers customer a cost effective and reliable solution to their process control requirements. This range comes with the Single and Double diaphragm construction to suit a wide range of over pressure and measuring range requirements. Available in variety of wetted part material, the DG differential pressure gauge can be used for variety of applications.
Key Features
- Nominal Diameter of 100 mm and 150 mm
- Degree of Protection IP55/IP65/IP67
- Stainless steel enclosure as standard
- Blowout Protection
- Ranges available from 0 to 25mbar, up to 0 to 25bar.
- Monel pressure connection, material and options available for double diaphragm construction
- Double & single diaphragm construction depends to range & static pressure & wetted part materials
Related products
-
CP Pressure Gauge
Capsule Type Pressure Gauge, manufactured in stainless steel in the EU to EN837CP Pressure Gauge
Manufactured in stainless steel within the EU, in accordance with EN837 standards. This product is designed for use in corrosive environments and is resistant to chemical attack. The standard capsule material is stainless steel, AISI 316. The CP capsule type pressure gauges are suitable for a wide range of low pressure applications in industries such as oil and gas, chemical, petrochemical, refining, power and marine, on dry and clean gasses, air, and exhaust gasses from chimneys.
Key Features
- Degree of Protection IP55
- Nominal Diameter of 100 & 150 mm
- Stainless steel enclosure as standard
- Blowout Protection
-
D34 Differential Pressure Transmitter – D Series
Designed for gas, ATEX/IECEx certifiedD34 Differential Pressure Transmitter – D Series
The D34 measures the differential pressure of gases. Typical applications include the measurement of blast pressure, chimney draughts or pressure/underpressure in furnace chambers. The transmitter can withstand overpressure up to 1 bar. The housing of the electronic circuit is IP66/67 rated.
Key Features
- High accuracy ±0.1%
- 4-20mA analogue with digital communications
- Fully HART ® compatible
- ATEX certified and IECEx
- Ability to locally configure measuring range
-
Differential Pressure Transmitter D31 – D-Series
HART Communication, aluminium or stainless steel enclosureDifferential Pressure Transmitter D31 – D-Series
The D31 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid. The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads of up to 250/320/413 bar. The casing is made of cast aluminium alloy or 316 stainless steel with a IP66/IP67 rating. The design of the casing enables the use of a local display, rotation of the display by 90°, rotation of the casing by 0–355° relative to the sensor, and a choice of cable direction.
The D31 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 413 bar.
Key Features
• Die cast weatherproof enclosure to IP66 (NEMA 4).
• Stainless steel mechanism.
• Internal tamperproof set point adjustment.
• Calibrated scale.
• Set point adjustment from -2.5mbar (-1 in H2O) up to 1.6 bar (20psi) dependent on model.
• ECAS Certified (Emirates Conformity Assessment Scheme) -
Pressure Gauge – GS Series
Cost effective with safety prioritisedPressure Gauge – GS Series
The GS solid front safety pattern pressure gauges offers customers a cost- effective and reliable solution to their arduous process control requirements.
This pressure gauge is designed with extra emphasis on ‘Safety’. Safety is guaranteed by a protective baffle wall positioned between the pressure element assembly and the dial, and by a backplate blow-out device which allows emergency pressure venting.
Available with a wide variety of casing options and sizes, the GS pressure gauge can be used for a variety of applications when pressure measurements are needed. Oil and Gas, Chemical, Power and the Food Industry are just a few who utilise this robust pressure gauge.
