Showing all 10 results

• 

  Cooling Tower

  Cooling Tower

  Delta Mobrey’s Cooling Towers are a simple device designed to allow for pressure instruments to operate at excessive temperatures.

  Categories: Accessories, Pressure, Product class, Temperature
  Pressure Device Accessories
• 

  Pressure & Temperature Instrument Accessories

  Pressure & Temperature Instrument Accessories

  Delta Mobrey’s Accessories are all made from a Stainless Steel construction with the option of an exotic material. Providing full protection for the instruments and special signal output.

  Categories: Accessories, Pressure, Product class, Temperature
  Pressure & Temperature Instruments Accessories Installation & Protection
• 

  D72 Smart HART Temperature Transmitter – D-Series

  D72 Smart HART Temperature Transmitter – D-Series

  The model D72 Smart Temperature Transmitter, part of our D-Series,  is suitable for measuring temperatures between -200°C and 1820°C, and comes with custom probe lengths and various thermowell options, making it suitable for a number of industries where extremes of temperature may occur.  These industries can be the more traditional ones, ie Oil & Gas, Petrochemicals.  We have also used this product win the Food and Beverage industry, see our featured article about the sugar industry.

  Key Benefits

  •  ATEX – Intrinsically Safe
  •  4-20mA output signal.
  •  Fully HART ® compatible.
  •  Galvanic insulation (In, Out)
  •  Programmable sensor type
  •  Programmable measuring range
  •  Thermoresistance line compensation
  •  Compensation of thermocouple cold junction
  •  Autodiagnostic system
  •  Linearisation of output signal on 20 point curve for specific application is available
  •  Write protection option through DKAP-03 communicator, ‘D-Soft’ program or software using library EDDL

  Categories: Approvals, ATEX Ex ia, D-Series, Measurement, Product class, Series, Temperature, Transmitters
  ATEX accredited, with or without sensor
• 

  Temperature Switches – Sentry Series

  Temperature Switches – Sentry Series

  The Sentry Series offers exceptional performance and high build quality, it is  ATEX and IECEx Flameproof accredited.  Performance is assured by repackaging Delta Mobrey’s well proven sensor technologies in a new, simple, one-piece enclosure. This repackaging design makes the Sentry series more cost effective as well as environmentally kinder as it uses 70% less material to manufacture.  With a choice of models, the Sentry Series works well in all process plants and can be used in Zone 1 and 2 Hazardous Areas or SIL 2 safety related systems. This Sentry switch is available in models T01 and T02 (EAC certification is available on request).

  Key Features

  • SPDT & DPDT Switch Outputs
  • Aluminium Epoxy Coated Weatherproof Enclosure IP66/NEMA4X
  • ATEX / IECEx Flameproof
  • 316 Stainless Steel capillary and bulb.
  • Field Adjustable Set-points Against a Reference Scale
  • Temperature Ranges up to 350°C (660°F)
  • Safety Vented Design as Standard
  • Suitable for use SIL 2 safety related systems

   

  Categories: Approvals, ATEX Ex ia, CU TR EAC Exia, IECEx Ex ia, Measurement, Product class, Sentry Series, Series, SIL 2, Switches, Temperature
  High flexibility on controls and alarms
• 

  700 Temperature Switch – Performance Series

  700 Temperature Switch – Performance Series

  The 700 Performance Series switch has a flexible thermal system and is suitable for setpoints between -50°C and 300°C with maximum working temperatures up to 310°C.  it is ATEX and IECEx accredited with environment and hermetically sealed options available.  All of which can work in traditional process instrumentation industries.  This has been part of our product portfolio for many years, the initial product was originally developed  in the mid 1970’s, this mature product has undergone several enhancements to ensure it continues to give the level of reliability required today.   Available in models 721/2/3, 731/2/3/4, 771/2/3/4 & 781 (EAC certification is available on request).

  Key Features

  • Precision stainless steel mechanism for arduous atmospheres and high humidity.
  • Set point adjustable over whole range against calibrated scale with tamperproof adjuster.
  • Weatherproof and Flameproof models.
  • Hermetically sealed microswitch option.
  • Models for fixed switching differential, adjustable differential and HI-LO operation.

  Categories: Approvals, ATEX Ex d, CU TR EAC Exd, IECEx Ex d, Measurement, Performance Series, Product class, Series, Switches, Temperature
  Control applications, working temperature up to 300C
• 

  DPT-2000 SMART HART Temperature Transmitter – D-series

  DPT-2000 SMART HART Temperature Transmitter – D-series

  The DPT-2000 Temperature Transmitter is suitable for measuring temperatures between -200°C and 550°C, and comes with custom probe lengths and various thermowell options. With a high level of accuracy of ±0.075% across all sensors this product can be utilised in multiple industries, where a large range of temperatures are possible.  This product has been successful in the Oil and Gas, Petrochemical, Power and Water industries. It has also been used in the Food and Beverage industry and is featured in our article about the sugar industry.

  Key Features

  • High accuracy ±0.075%
  • 4-20mA analogue with digital communications
  • Fully HART ® compatible
  • Programmable range, zero shift, characteristic and damping ratio with local panel keys
  • ATEX certified (Intrinsic Safety, Flameproof)

  Categories: Approvals, ATEX Ex d, ATEX Ex ia, D-Series, Measurement, Product class, Series, Temperature, Transmitters
  Pt100 or Thermocouple integral sensor
• 

  GR7 Temperature Switches – Compact Series

  GR7 Temperature Switches – Compact Series

  The GR7 Temperature Switch provides users with a compact, robust and hermetically sealed switch for use in safe and hazardous areas.  This makes them particularly suitable for panel mounting in harsh environments. This product comes with a rigid or semi-rigid thermal system and is suitable for setpoints between -40°C and +350°C with maximum working temperatures up to 360°C. (EAC certification is available on request).

  Key Features

  • Compact and rugged design
  • Weatherproof IP66/NEMA 4
  • ATEX Flameproof CENELEC Ex d IIC option
  • ATEX Intrinsically Safe ATEX Ex ia IIC option.
  • Stainless steel body option NEMA 4X rating
  • Optional weatherproof, ATEX Ex e, ATEX Ex ia or ATEX
  • Flameproof Ex d IIC terminal enclosures.
  • 316 Stainless steel capillary and bulb.
  • Ranges available up to 350°C (660°F)
  • Maximum working temperature up to 360°C (680°F)
  • Field adjustable.
  • Hermetically sealed snap switch CSA listed.

  Categories: Approvals, ATEX Ex d, ATEX Ex ia, Compact Series, CU TR EAC Exd, Measurement, Product class, Series, Switches, Temperature
  Reduced space applications, flying leads or junction box installation
• 

  S71 Temperature Switches

  S71 Temperature Switches

  The model S71 Temperature Switch comes with a rigid or semi-rigid thermal system and is suitable for setpoints between -40°C and +260°C with maximum working temperatures up to 270°C. (EAC certification is available on request).

  Categories: Approvals, ATEX Ex d, ATEX Ex ia, CU TR EAC Exd, CU TR EAC Exia, Industrial Series, Measurement, NEC 500 Expl., NEC 500 IS, Product class, Series, SIL 1, Switches, Temperature
  Weatherproof / Ex d Industrial Series
• 

  Bimetal Temperature Gauge – GB Series

  Bimetal Temperature Gauge – GB Series

  Stainless steel enclosure and is manufactured in the EU.  The BG range is suitable for a wide range of applications in multiple industries where a safety barrier and blow out back are required to give added security.

  Key Features
  •Nominal Diameter options of 100mm, 125mm and 150mmSt. Steel case.
  •With rigid or every angle stem.
  •Watertight casing stainless steel execution
  •Indication ranges range between -50 to +500 °C
  •Version B: made with the traditional criteria of quality and versatility whilst also satisfying the specific needs of delivery and flexibility
  •Version S: a very good quality level and offers considerable economic advantages due to updated product modern technologies.

  Categories: Gauges, Temperature
  Stainless steel, rigid or every angle, made in the EU
• 

  Bimetal Temperature Gauge – GE Series

  Bimetal Temperature Gauge – GE Series

  Manufactured in the EU, using a stainless steel enclosure, the two versions of these gauge can be configured for different industrial applications.  For dry applications the product is more standard.  However, for industries where the level of vibration needs to be considered this product comes with a fluid filled case.

  These two variations make the GE Bimetal Temperature Gauge a product that can work with hazardous environments such as chemical and petrochemical, pharmaceutical and nuclear power plants.

  Categories: Gauges, Temperature
  All stainless steel, direct or remote, made in the EU