Flow
Showing all 7 results
-
D32 Analogue Differential Pressure Transmitter – D Series
Basic, low cost and robustD32 Analogue Differential Pressure Transmitter – D Series
The D32 Differential Pressure Transmitters is a cost effective solution for the measurement of differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid.
The process connection to mount directly on to a 3 or 5 valve manifold, and also available is several type of chemical seals to measure any type of process fluid and condition.
Key Features
- Accuracy ±0.25%
- 4-20mA output signal
- Static pressure limit up to 420 bar
- Gold plated diaphragm option, suitable for hydrogen based applications
- Hastelloy C276 wetted parts option
- Intrinsic safety certificate (ATEX, IECEx)
-
Flow Element Series
Orifice plates, venturi & pitot tubesFlow Element Series
The most simple and economic method for a flow measurement of liquids or gases, in either compact or standard sizes, dependening upon the application required. A complete system ready for flow measurement with Pressure and Temperature compensation.
The elements which make up the flow and measurement set are constructed according to ANSI, B16.5/ISO 51
Key Features
• Standard construction material: Carbon Steel, Stainless
Steel. Wide range of exotic material is available according
to the application requirements
• Rating ANSI 300, 600, 900, 1500 or DIN starting from PN6.
• Manufactured from forged piece and completely machined
with fine and uniform tool finish
• Standard 2+2 ½”NPTF pressure taps with plugs at 180° for
universal application on liquid or gasses
• Orifice plate with handle as standard
• Jack screw supplied as standard
• Calculation sheet, dimensional drawing and materials certificates are supplied with the elements as standard
• Flow direction marked when required -
DMSP900SH Level and Flow Transmitters
Hart Transmitters Ultrasonic TransmittersDMSP900SH Level and Flow Transmitters
Introducing Delta Mobrey’s new range of Ultrasonic Level Products
Delta Mobrey level transmitters provide simple installation and non-contact measurement of liquid level, tank contents, or open channel flow. The transmitters offer IP68 protection and are ideal for enclosed wet wells and sumps. All models have HART comms for communication with a HART master device such as Delta Mobrey’s DMCU900 controller. Installation accessories are also available.
-
131 Flow Switch – Performance Series
Control and alarm applications, designed for HVAC131 Flow Switch – Performance Series
This Vane Operated Flow Switch is designed to provide protection and control in ducted air systems with flammable atmospheres making it suitable for traditional industries such as Oil and Gas; Chemical, Petrochemical and Refining where it works best in temperatures ranging from 0 -60C.
Key Features
• Air Flow.
• 2.5 to 12.5 m/sec.
• 500 to 2500 ft/min
• ATEX and IECEx. -
Differential Pressure Transmitter D31 – D-Series
HART Communication, aluminium or stainless steel enclosureDifferential Pressure Transmitter D31 – D-Series
The D31 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid. The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads of up to 250/320/413 bar. The casing is made of cast aluminium alloy or 316 stainless steel with a IP66/IP67 rating. The design of the casing enables the use of a local display, rotation of the display by 90°, rotation of the casing by 0–355° relative to the sensor, and a choice of cable direction.
The D31 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 413 bar.
Key Features
• Die cast weatherproof enclosure to IP66 (NEMA 4).
• Stainless steel mechanism.
• Internal tamperproof set point adjustment.
• Calibrated scale.
• Set point adjustment from -2.5mbar (-1 in H2O) up to 1.6 bar (20psi) dependent on model.
• ECAS Certified (Emirates Conformity Assessment Scheme) -
D35 Differential Pressure Transmitter – D-Series
Aluminium or stainless steel enclosure, for all applicationsD35 Differential Pressure Transmitter – D-Series
The model D35 Differential Pressure Transmitter comes fitted with two diaphragm seals. It is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar. The D Series SMART Differential Pressure Transmitter is suitable for a wide range of applications for measuring differential pressure, level and flow.
Key Features
- ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe
- High accuracy ±0.1%
- Fully HART ® compatible
- 4-20mA analogue with digital communications
- Fully welded sensor guarantees tightness of oil systems for long term usage
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- Linearisation of output signal on 20 point curve for specific application is available
- Write protection option through DKAP-03 communicator, ‘D-Soft’ program or software using library EDDL
-
D33 Differential Pressure Transmitter – D-Series
HART Communication, stainless steel enclosure suite for all applicationsD33 Differential Pressure Transmitter – D-Series
The D33 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specifically selected type of manometric liquid. The casing is made of cast aluminium alloy or 316 stainless steel with IP66/67 protection. The design of the casing enables the rotation of the casing by 0-355° relative to the sensor, and a choice of cable direction. The model D33 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar.
Key Features
- Accuracy +-0.1%
- 4-20mA output signal
- Fully HART ® compatible
- Static pressure limit up to 420 bar
- ATEX certified (Intrinsically Safe)
- Gold plated diaphragm option
- Hastelloy C276 wetted parts option
Related products
-
Differential Pressure Transmitter D31 – D-Series
HART Communication, aluminium or stainless steel enclosureDifferential Pressure Transmitter D31 – D-Series
The D31 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid. The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads of up to 250/320/413 bar. The casing is made of cast aluminium alloy or 316 stainless steel with a IP66/IP67 rating. The design of the casing enables the use of a local display, rotation of the display by 90°, rotation of the casing by 0–355° relative to the sensor, and a choice of cable direction.
The D31 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 413 bar.
Key Features
• Die cast weatherproof enclosure to IP66 (NEMA 4).
• Stainless steel mechanism.
• Internal tamperproof set point adjustment.
• Calibrated scale.
• Set point adjustment from -2.5mbar (-1 in H2O) up to 1.6 bar (20psi) dependent on model.
• ECAS Certified (Emirates Conformity Assessment Scheme)
