Transmitters
Showing 1–16 of 22 results
-
DMCU800 – Programmable Controller
4-20mA Input ControllerDMCU800 – Programmable Controller
The DMCU800 controller accepts a range of inputs including 4-20mA and thermocouples. Values are displayed on its clear LED screen. It is fully configurable via the push button controls. Outputs are 4-20mA and 5 relays for control or alarms. A programmable look up table means it can be used on non-linear shaped tanks to give volumetric measurements. The controller is available in both panel mount and IP65 wall mount versions with options for 24Vdc or 110/220Vac supplies. Typical applications are for use with the Delta Mobrey series of 9700 pressure transmitters or the DMSP422 level transmitters.
-
D45 SMART Level Transmitter – D Series
For pressurised tanks with no outside accessD45 SMART Level Transmitter – D Series
The D45 Smart Level Transmitter is a probe most suited for measuring the level in pressurised tanks. It is compact yet robust, and is categorised as flameproof and intrinsically safe all with high accuracy. Equipped with a fully welded sensor which guarantees tightness for oil systems, even over long term use.
This probe can be used with a wide range of connections, making it versatile, and is easily configurable with the D-Software.
This digital product is part of a family of SMART transmitters, but this one is most beneficial where there is no external access to a tank.
Key Features
• ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe
• High accuracy ±0.16% • Fully HART ® compatible
• 4-20mA analogue with digital communications
• Fully welded sensor guarantees tightness of oil systems for long term usage
• Programmable range, zero shift, characteristic and damping ratio with local panel keys
-
DMSP900SH Level, Contents and Flow Transmitters
Hart Transmitters Ultrasonic TransmittersDMSP900SH Level, Contents and Flow Transmitters
Introducing Delta Mobrey’s new range of Ultrasonic Level Products
Delta Mobrey level transmitters provide simple installation and non-contact measurement of liquid level, tank contents, or open channel flow. The transmitters offer IP68 protection and are ideal for enclosed wet wells and sumps. All models have HART comms for communication with a HART master device such as Delta Mobrey’s DMCU900 controller. Installation accessories are also available. View our webinar featuring the DMSP900SH
-
DMSP422, DMSP400 and DMSP500 – Ultrasonic Transmitters
Display for chemical and water treatmentDMSP422, DMSP400 and DMSP500 – Ultrasonic Transmitters
Delta Mobrey’s Ultrasonic Level Transmitters are your cost-effective solution for reliable level measurement instrumentation. The DMSP Series can be used for virtually all level measurements, and are ideal for mounting over liquid surfaces in tanks or open channel flow. Model options offer HART communication, relay outputs and hazardous area certification. All models have LCD display and push button configuration. View our webinar featuring the DMSP.
Key Features
• Non-contact, continuous measurement of Level, Contents or Open Channel Flow
• Local LCD display and push button menu for parameter display, configuration and diagnostics
• Two wire loop powered 4-20mA with HART® output
• Integral relay output option
• Speed of sound temperature compensation
• Configure to ignore disturbing object false echo
• IP67/68 construction
• Plastic, or painted aluminium enclosure
-
DMCU900 Control Unit – Ultrasonic
Universal HART Input Control UnitDMCU900 Control Unit – Ultrasonic
The DMCU900 Series Universal Controller provides an interface between Delta Mobrey Ultrasonic Transmitters and operators or control systems.
All models have a large LCD display with push button menu driven programming. Options are available for data logging, with download facility. The DMCU900 provides an intrinsically safe power supply for I.S. transmitters. The wall mount model has a protective hinged lid with clear visibility of the display.
The DMCU900 series provides full functionality for configuration and diagnostics of any Delta Mobrey HART ultrasonic transmitter.
This product, when used in conjunction with Detla Mobrey Ultrasonic level transmitters, can be used to display the level or volume of linear or non-linear tanks, measure open flow for many weirs and flume designs as well as giving high or low alarms for storage tanks.
Key Features
- Controller for use with DMSP400, DMSP500 and DMSP900 series level transmitters via HART comms
- Display measured values, control pumps, actuators and alarms
- Configure Delta Mobrey HART transmitters, access diagnostics
- Single or dual transmitter inputs
- 4-20mA and up to five relay outputs
- Data logging option with SD card slot and RS485 comms
- DC or AC power supply
- Galvanically isolated supply to power Intrinsically Safe transmitters
-
D72 Smart HART Temperature Transmitter – D-Series
ATEX accredited, with or without sensorD72 Smart HART Temperature Transmitter – D-Series
The model D72 Smart Temperature Transmitter, part of our D-Series, is suitable for measuring temperatures between -200°C and 1820°C, and comes with custom probe lengths and various thermowell options, making it suitable for a number of industries where extremes of temperature may occur. These industries can be the more traditional ones, ie Oil & Gas, Petrochemicals. We have also used this product win the Food and Beverage industry, see our featured article about the sugar industry.
Key Benefits
- ATEX – Intrinsically Safe
- 4-20mA output signal.
- Fully HART ® compatible.
- Galvanic insulation (In, Out)
- Programmable sensor type
- Programmable measuring range
- Thermoresistance line compensation
- Compensation of thermocouple cold junction
- Autodiagnostic system
- Linearisation of output signal on 20 point curve for specific application is available
- Write protection option through DKAP-03 communicator, ‘D-Soft’ program or software using library EDDL
-
MLT100 SMART HART Displacer Level Transmitter
LVDT technology, direct or chamber mountedMLT100 SMART HART Displacer Level Transmitter
The Delta Mobrey MLT100 Level Transmitter is one of the most advanced displacer based devices on the market, coupling the time proven buoyancy principle with state of the art electronics in an instrument of high reliability and stability.
Special care has been taken in design to ensure a small mounting envelope is maintained, resulting in reduced weight and associated savings in mounting.
Available Worldwide excluding Europe.
-
Analogue Submersible Level Transmitters – 9700 Series
Marine Certified, various installation options, CSAAnalogue Submersible Level Transmitters – 9700 Series
The Delta Mobrey 9700 Series range of tank mounted transmitters provide you with precise and reliable level measurement solutions when in-tank foaming, vapor layers, and temperature gradients prevent use of other instrumentation. These transmitters are designed to perform in the extreme conditions of industrial applications. Available in submersible and externally mounted (floodable) versions, each transmitter gives you high performance and good long term stability, and is virtually maintenance free.
Key Features
- Factory sealed and tested for submersed duty
- 4–20 mA output signal proportional to level
- Flush mounted ceramic sensor
- Good long term stability
- Ideal for industrial or marine applications
- Wide range of mounting options
- Low cost installation
- Readouts for control room or plant mounting
-
Analogue Level Probes – DSGE Series
Transmitter suitable for clean water, seawater, sludgeAnalogue Level Probes – DSGE Series
The DSGE-25/16 Hydrostatic Level Probes are designed to measure liquid levels in tanks, deep wells or narrow piezometers. The probe measures liquid levels, based on a simple relationship between the height of the liquid column and the resulting hydrostatic pressure. The pressure measurement is carried out on the level of the separating diaphragm of the immersed probe and is related to atmospheric pressure through a capillary in the cable.
When lowered to the reference level, the probe may either hang freely on the cable or lie on the bottom of the tank. The cable with the capillary can be extended using a standard signal cable. For the cable connection a special DSG cable hanger is recommended.
Key Features
- 4–20 mA output signal proportional to level
- Flush mounted ceramic sensor
- Good long term stability
- Ideal for industrial or marine applications
- Wide range of mounting options
- Low cost installation
- Readouts for control room or plant mounting
-
D32 Analogue Differential Pressure Transmitter – D Series
Basic, low cost and robustD32 Analogue Differential Pressure Transmitter – D Series
The D32 Differential Pressure Transmitters is a cost effective solution for the measurement of differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid.
The process connection to mount directly on to a 3 or 5 valve manifold, and also available is several type of chemical seals to measure any type of process fluid and condition.
Key Features
- Accuracy ±0.25%
- 4-20mA output signal
- Static pressure limit up to 420 bar
- Gold plated diaphragm option, suitable for hydrogen based applications
- Hastelloy C276 wetted parts option
- Intrinsic safety certificate (ATEX, IECEx)
-
D22 Pressure Transmitter
Cost effective analogue transmitter, robust and fixed rangeD22 Pressure Transmitter
The D22 Pressure Transmitters are an economic solution for the measurement of pressure, underpressure, and absolute pressure of gases, vapours and liquids. Available in a wide range of blind and compact construction for a wide range of industrial applications. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specifically selected type of manometric liquid.
This series is suitable for use in corrosive atmospheres and is also resistant to chemical attack. The model D22 Pressure Transmitter is suitable for measuring pressures from 0 to 25 mbar up to 0 to 1000bar with maximum overpressure up to 1200bar.
-
2HT SMART HART Pressure Transmitter
Manufactured in stainless steel for heavy duty applications2HT SMART HART Pressure Transmitter
Delta Mobrey’s 2HT Pressure Transmitter offers customers a compact HART communicating transmitter housed in a robust, all stainless steel enclosure.
The 2HT can be supplied with an option D-CAL digital display that not only provides users with a visible indication of the measured pressure but that also provides users with access to over 80% of the transmitters HART commands, therefore reducing the need for costly third party communicators. For applications where the ambient temperature can vary significantly, the 2HT can be supplied with an optional high accuracy calibration enabling the accuracy to be maintained within 0.1% for ambient temperatures ranging from -30°C to +70°C.
The model 2HT pressure transmitter is suitable for measuring pressures up to 1000bar with maximum working pressures up to 1500bar and has been designed to work in harsh and heavy duty applications, such as off-shore.
-
387 Analogue Pressure Transmitter
Designed for heavy duty applications387 Analogue Pressure Transmitter
The Delta Mobrey 387 pressure transmitter has a compact, robust, all stainless steel construction making it particularly suited to the harsh corrosive environments of offshore applications. It also offers excellent accuracy of 0.15% of the upper range value, including combined effects of linearity, hysteresis and repeatability,
Product applications
The 387 is suitable for a wide range of applications in many industry sectors:
- Oil & Gas
- Chemical
- Petrochemical
- Water
- Power
-
8000 Pressure Transmitter
Weatherproof 8000 Series8000 Pressure Transmitter
The model 8000 Pressure Transmitter is suitable for measuring pressures between 0 and 50 bar with maximum working pressures up to 120bar.
-
8000SAN Pressure Transmitter
Weatherproof 8000SAN Series8000SAN Pressure Transmitter
8000SAN Series
Weatherproof
The model 8000SAN Pressure Transmitter is suitable for measuring pressures between 0 and 16 bar with maximum working pressures up to 60bar.
-
DPT-2000 SMART HART Temperature Transmitter – D-series
Pt100 or Thermocouple integral sensorDPT-2000 SMART HART Temperature Transmitter – D-series
The DPT-2000 Temperature Transmitter is suitable for measuring temperatures between -200°C and 550°C, and comes with custom probe lengths and various thermowell options. With a high level of accuracy of ±0.075% across all sensors this product can be utilised in multiple industries, where a large range of temperatures are possible. This product has been successful in the Oil and Gas, Petrochemical, Power and Water industries. It has also been used in the Food and Beverage industry and is featured in our article about the sugar industry.
Key Features
- High accuracy ±0.075%
- 4-20mA analogue with digital communications
- Fully HART ® compatible
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- ATEX certified (Intrinsic Safety, Flameproof)
Related products
-
D23 SMART HART Pressure Transmitter – D-Series
Cost effective with stainless steel enclosure, for all industrial useD23 SMART HART Pressure Transmitter – D-Series
Compact pressure transmitter, with a robust construction, making it an essential for any corrosive environments, or applications where chemicals may damage process instrumentation equipment. This product also comes with a gold plated diaphragm, making it essential when working with Hydrogen. The gold diaphragm will protect against hydrogen permeation, which protects the accuracy and integrity of the product in such conditions. The model D23 Pressure Transmitter is suitable for measuring pressures from -1 to 1000bar with maximum working pressures up to 1200bar.
Key Features
- Compact design and robust construction.
- 4-20mA output signal.
- Fully HART ® compatible.
- ATEX certified (both protection mode: Intrinsic Safety & Flameproof)
- IECEx Certified Flameproof only (Intrinsic Safety is coming soon)
- Gold plated diaphragm.
- Hastelloy C276 wetted parts option.
