Controller
Showing all 4 results
-
DMCU800 – Programmable Controller
DMCU800 – Programmable Controller
The DMCU800 controller accepts a range of inputs including 4-20mA and thermocouples. Values are displayed on its clear LED screen. It is fully configurable via the push button controls. Outputs are 4-20mA and 5 relays for control or alarms. A programmable look up table means it can be used on non-linear shaped tanks to give volumetric measurements. The controller is available in both panel mount and IP65 wall mount versions with options for 24Vdc or 110/220Vac supplies. Typical applications are for use with the Delta Mobrey series of 9700 pressure transmitters or the DMSP422 level transmitters.
-
DMCU900 Control Unit – Ultrasonic
DMCU900 Control Unit – Ultrasonic
The DMCU900 Series Universal Controller provides an interface between Delta Mobrey Ultrasonic Transmitters and operators or control systems.
All models have a large LCD display with push button menu driven programming. Options are available for data logging, with download facility. The DMCU900 provides an intrinsically safe power supply for I.S. transmitters. The wall mount model has a protective hinged lid with clear visibility of the display.
The DMCU900 series provides full functionality for configuration and diagnostics of any Delta Mobrey HART ultrasonic transmitter.
This product, when used in conjunction with Detla Mobrey Ultrasonic level transmitters, can be used to display the level or volume of linear or non-linear tanks, measure open flow for many weirs and flume designs as well as giving high or low alarms for storage tanks.
Key Features- Controller for use with DMSP400, DMSP500 and DMSP900 series level transmitters via HART comms
- Display measured values, control pumps, actuators and alarms
- Configure Delta Mobrey HART transmitters, access diagnostics
- Single or dual transmitter inputs
- 4-20mA and up to five relay outputs
- Data logging option with SD card slot and RS485 comms
- DC or AC power supply
- Galvanically isolated supply to power Intrinsically Safe transmitters
-
Suspended Solids Monitoring – MSM400
Suspended Solids Monitoring – MSM400
The Delta Mobrey MSM400 system continuously measures the suspended solids within sludges or slurries. Many years of practical experience have shown that measurement of ultrasonic attenuation in a slurry is directly proportional to the percentage of suspended solids. The MSM400 system uses this principle to give a digital display and continuous output of the suspended solids measurement.
Commonly used in waste water treatment, industrial and mining plants and suitable for a wide range of fluids such as effluent, limestone slurry and China clay. Applications include sludge blanket measurement and detection, and slurry density control. The MSM400 controller is used with ultrasonic gap sensors available for either tank or pipe installation with a range of gap sizes to suit the application.
-
MCU200 Suspended Solids Detection Switch
MCU200 Suspended Solids Detection Switch
The MCU controller and gap sensor when used together provide an ultrasonic point level liquid switch. Typical applications include sludge blanket level detection in settlement tanks, interface detection for immiscible liquids and contamination detection, such as oil in water or water in oil. The MCU201 and MCU203 control units provide simple and economical control electronics for wall-mounting near a tank or pipeline containing a single ultrasonic gap sensor. The sensors operate on the attenuation of an ultrasonic signal through the fluid.