QUICK PRODUCT SEARCH
ADVANCED SEARCH

    Approvals

  • ATEX Ex d
  •  
  • ATEX Ex ia
  •  
  • ATEX Ex N
  •  
  • CCOE
  •  
  • Class 1E
  •  
  • CRN
  •  
  • CU TR EAC Exd
  •  
  • CU TR EAC Exia
  •  
  • Ex GOST R & RTN Permit
  •  
  • GGTN-K Permit
  •  
  • GPN Permit (Belarus)
  •  
  • HAF604
  •  
  • IECEx Ex d
  •  
  • IECEx Ex ia
  •  
  • INMETRO Ex d
  •  
  • NEC 500 Expl.
  •  
  • NEC 500 IS
  •  
  • PED CAT IV
  •  
  • RCC-E
  •  
  • SIL
  •  
  • SIL 1
  •  
  • SIL 2
  •  
  • SIL 3
  •  

    Measurement

  • Differential pressure
  •  
  • Flow
  •  
  • Level
  •  
  • Pressure
  •  
  • Steam & Water
  •  
  • Temperature
  •  

    Product class

  • Accessories
  •  
  • Conductivity Probe
  •  
  • Controller
  •  
  • Diaphragm Seals
  •  
  • Gauges
  •  
  • Handheld Communicator
  •  
  • Mobrey
  •  
  • Switches
  •  
  • Transmitters
  •  

    Series

  • Compact Series
  •  
  • D-Series
  •  
  • Digital Series
  •  
  • Industrial Series
  •  
  • Performance Series
  •  
  • Sentry Series
  •  
  • Volume Series
  •  

    Steam and Water



D45 SMART Level Transmitter – D Series

SIL 2

Showing all 10 results

  • D45 SMART Level Transmitter – D Series

    D45 SMART Level Transmitter – D Series

    The D45 Smart Level Transmitter is a probe most suited for measuring the level in pressurised tanks.  It is compact yet robust, and is categorised as flameproof and intrinsically safe all with high accuracy. Equipped with a fully welded sensor which guarantees tightness for oil systems, even over long term use.

    This probe can be used with a wide range of connections, making it versatile, and is easily configurable with the D-Software.

    This digital product is part of a family of SMART transmitters, but this one is most beneficial where there is no external access to a tank.

    Key Features

    • ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe

    • High accuracy ±0.16% • Fully HART ® compatible

    • 4-20mA analogue with digital communications

    • Fully welded sensor guarantees tightness of oil systems for long term usage

    • Programmable range, zero shift, characteristic and damping ratio with local panel keys

    For pressurised tanks with no outside access
  • Pressure Switch – Sentry Series

    Pressure Switch – Sentry Series

    The Sentry family of switch products, comprising of PO1, PO2 and PO3,  offers pressure ranges from -1 bar up to +1.5 bar and Pmax up to 15 bar. The one-piece enclosure offers exceptional build quality, across the range, as well as a reduction in the parts needed for manufacture, making it more economic to manufacture and better for the environment. (EAC certification is available on request).

    Key Features
    • SPDT & DPDT Switch Outputs
    • Stainless steel and Aluminium Epoxy Coated Flameproof Enclosure IP66/NEMA4X
    • ATEX / IECEx Flameproof & Intrinsically Safe
    • 316 Stainless Steel Wetted Parts as Standard.
    • Field Adjustable Set-points Against a Reference Scale
    • Pressure Ranges up to 700bar (10,000psi)
    • Maximum Working Pressure up to 1000bar (15,000psi)
    • Safety Vented Design as Standard
    • Suitable for use SIL 2 safety related systems
    • Market leading 5 year warranty

    Flexibility on controls, alarms, price sensitive applications
  • Temperature Switches – Sentry Series

    Temperature Switches – Sentry Series

    The Sentry Series offers exceptional performance and high build quality, it is  ATEX and IECEx Flameproof accredited.  Performance is assured by repackaging Delta Mobrey’s well proven sensor technologies in a new, simple, one-piece enclosure. This repackaging design makes the Sentry series more cost effective as well as environmentally kinder as it uses 70% less material to manufacture.  With a choice of models, the Sentry Series works well in all process plants and can be used in Zone 1 and 2 Hazardous Areas or SIL 2 safety related systems. This Sentry switch is available in models T01 and T02 (EAC certification is available on request).

    Key Features

    • SPDT & DPDT Switch Outputs
    • Aluminium Epoxy Coated Weatherproof Enclosure IP66/NEMA4X
    • ATEX / IECEx Flameproof
    • 316 Stainless Steel capillary and bulb.
    • Field Adjustable Set-points Against a Reference Scale
    • Temperature Ranges up to 350°C (660°F)
    • Safety Vented Design as Standard
    • Suitable for use SIL 2 safety related systems

     

    High flexibility on controls and alarms
  • D0 Differential Pressure Switch – Sentry Series

    D0 Differential Pressure Switch – Sentry Series

    This Sentry switch is available in models D01, D02 and D03 (EAC certification is available on request).

    • Robust weatherproof, epoxy coated, aluminium housing approved to IP66 and NEMA 4X
    • SPDT and DPDT switch contacts with environmentally and hermetically sealed options
    • Stainless steel wetted parts as standard
    • Better than 1% set-point repeatability
    • Market leading 5 year warranty
    • Pressure ranges from 0.4 to 700 bar (4 to 1500 psi)
    • Pmax up to 1000 bar depending on range
    Weatherproof/Flameproof/Ex ia
  • D31 Differential Pressure Transmitter – D-Series

    D31 Differential Pressure Transmitter – D-Series

    The D31 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid.  The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads of up to 250/320/413 bar. The casing is made of cast aluminium alloy or 316 stainless steel with degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display by 90°, rotation of the casing by 0–355° relative to the sensor, and a choice of cable direction.

    The D31 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 413 bar.

    Key Features
    • Die cast weatherproof enclosure to IP66 (NEMA 4).
    • Stainless steel mechanism.
    • Internal tamperproof set point adjustment.
    • Calibrated scale.
    • Set point adjustment from -2.5mbar (-1 in H2O) up to 1.6 bar (20psi) dependent on model.

     

    HART Communication, aluminium or stainless steel enclosure
  • D34 Differential Pressure Transmitter – D Series

    D34 Differential Pressure Transmitter – D Series

    The D34 measures the differential pressure of gases. Typical applications include the measurement of blast pressure, chimney draughts or pressure/underpressure in furnace chambers. The transmitter can withstand overpressure up to 1 bar. The housing of the electronic circuit has the degree of protection IP66/67.

    Key Features

    • High accuracy ±0.1%
    • 4-20mA analogue with digital communications
    • Fully HART ® compatible
    • ATEX certified and IECEx
    • Ability to locally configure measuring range

    Designed for gas, ATEX/IECEx certified
  • D35 Differential Pressure Transmitter – D-Series

    D35 Differential Pressure Transmitter – D-Series

    The model D35 Differential Pressure Transmitter comes fitted with two diaphragm seals and is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar. The D Series SMART Differential Pressure Transmitter is suitable for a wide range of applications for measuring differential pressure, level and flow.

    Key Features
    • ATEX – Flameproof and Intrinsically Safe IECEx – Flameproof and Intrinsically Safe
    • High accuracy ±0.1%
    • Fully HART ® compatible
    • 4-20mA analogue with digital communications
    • Fully welded sensor guarantees tightness of oil systems for long term usage
    • Programmable range, zero shift, characteristic and damping ratio with local panel keys
    • Linearisation of output signal on 20 point curve for specific application is available
    • Write protection option through DKAP-03 communicator, ‘D-Soft’ program or software using library EDDL

    Aluminium or stainless steel enclosure, for all applications
  • S30 Differential Pressure Switch – Industrial Series

    S30 Differential Pressure Switch – Industrial Series

    This robust pressure switch is suitable for a range of industrial applications, such as resistance to chemical attack or for use in corrosive atmospheres.  The S30 Differential Pressure Switch is suitable for setpoints between -12.5mbar and 10bar with maximum working pressures up to 110 bar. This switch comes in models S31 and S34 (EAC certification is available on request).

    Key Features
    • Weatherproof and Flameproof models ATEX and NEC 500
    • NACE MR-01-75 compatibility
    • Ranges available up to 700 bar (10,000 psi) Maximum working pressure up to 1000 bar (15,000 psi)
    • Field set point adjustment against a reference scale
    • Hermetically sealed microswitch options
    • Optional gold alloy contacts
    • Terminal block for easy field wiring
    • Safety vented design as standard
    • PED 2014/68/EU CAT IV option

    High performance on control or alarm applications
  • CS2/4 Pressure Switch – Compact Series

    CS2/4 Pressure Switch – Compact Series

    The Compact Series, (C S), switch has been designed to meet the specific requirements of panel applications, whether they be of the Wellhead Control, Hydraulic Power Unit or Chemical Injection Skid type.

    Their compact, rugged, all stainless steel construction makes them especially useful in the cramped and harsh environmental conditions that these applications demand. Supplied as standard with hermetically sealed switch contacts and with field adjustable set-points up to 700 bar, the Compact Series of Switches also come with either Intrinsically Safe or Flameproof approvals for use in Zone 0 or Zone 1 hazardous areas respectively.

    The model CS2 and CS4 Presure Switches are suitable for setpoints between 0.25bar and 700bar with maximum working pressures up to 1000bar. (EAC certification is available on request).

    Confined space and harsh environments
  • D33 Differential Pressure Transmitter – D-Series

    D33 Differential Pressure Transmitter – D-Series

    The D33 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specifically selected type of manometric liquid. The casing is made of cast aluminium alloy or 316 stainless steel with  IP66/67 protection. The design of the casing enables the rotation of the casing by 0-355° relative to the sensor, and a choice of cable direction. The model D33 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar.

    Key Features
    •Accuracy +-0.1%
    •4-20mA output signal
    •Fully HART ® compatible
    •Static pressure limit up to 420 bar
    •ATEX certified (Intrinsically Safe)
    •Gold plated diaphragm option
    •Hastelloy C276 wetted parts option

    HART Communication, stainless steel enclosure suite for all applications