Accessories
Showing all 8 results
-
Single or double contact for pressure and temperature gauges
High or standard case -
DMCU800 – Programmable Controller
4-20mA Input ControllerDMCU800 – Programmable Controller
The DMCU800 controller accepts a range of inputs including 4-20mA and thermocouples. Values are displayed on its clear LED screen. It is fully configurable via the push button controls. Outputs are 4-20mA and 5 relays for control or alarms. A programmable look up table means it can be used on non-linear shaped tanks to give volumetric measurements. The controller is available in both panel mount and IP65 wall mount versions with options for 24Vdc or 110/220Vac supplies. Typical applications are for use with the Delta Mobrey series of 9700 pressure transmitters or the DMSP422 level transmitters.
-
Cooling Tower
Pressure Device AccessoriesCooling Tower
Delta Mobrey’s Cooling Towers are a simple device designed to allow for pressure instruments to operate at excessive temperatures.
-
Pressure Instrument Accessories
Accessories Installation & ProtectionPressure Instrument Accessories
Delta Mobrey’s Accessories are all made from a Stainless Steel construction with the option of an exotic material. Providing full protection for the instruments and special signal output.
-
Thermowells
Flanged, threaded or customisedThermowells
Thermowells are used to protect the sensing element of the temperature instrument from corrosion, abrasion and high pressures. They allow the measuring instrument to be removed for recalibration or replacement, without interrupting the flow or stopping the process.
The bar stock thermowells are available in parallel, tapered or step manufactured variations as required. We offer a large number of customised thermowell designs or materials, to meet the specific requirements of customers. High accuracy and quality of production is an important aspect for our thermowells.
Key Features
- Solid bar stock construction or machined from a pipe
- 1 piece, forged construction available
- Different materials available or covered with PTFE
- Full penetration welds
- Flanges according to ANSI, DIN standard
- ASME PTC 19.3 Stress calculation available
- Stop Ring available in case of need
- Special and customized construction
-
D-COMM Handheld Communicator
Communicator Handheld CommunicatorD-COMM Handheld Communicator
D-COMM HART field communication is a portable battery supplied device, to enable communication with smart devices in remote applications.
-
Diaphragm Seals for Pressure Instruments
Direct/Remote Mount Diaphragm SealsDiaphragm Seals for Pressure Instruments
Complete range of diaphragm seals for application on all our pressure and differential pressure instruments.
-
Needle Valves, 2, 3 and 5 Ways
Direct and Remote V Series
Related products
-
D34 Differential Pressure Transmitter – D Series
Designed for gas, ATEX/IECEx certifiedD34 Differential Pressure Transmitter – D Series
The D34 measures the differential pressure of gases. Typical applications include the measurement of blast pressure, chimney draughts or pressure/underpressure in furnace chambers. The transmitter can withstand overpressure up to 1 bar. The housing of the electronic circuit is IP66/67 rated.
Key Features
- High accuracy ±0.1%
- 4-20mA analogue with digital communications
- Fully HART ® compatible
- ATEX certified and IECEx
- Ability to locally configure measuring range
-
CS2/4 Pressure Switch – Compact Series
Confined space and harsh environmentsCS2/4 Pressure Switch – Compact Series
The Compact Series, (C S), switch has been designed to meet the specific requirements of panel applications, whether they be of the Wellhead Control, Hydraulic Power Unit or Chemical Injection Skid type.
Their compact, rugged, all stainless steel construction makes them especially useful in the cramped and harsh environmental conditions that these applications demand. Supplied as standard with hermetically sealed switch contacts and with field adjustable set-points up to 700 bar, the Compact Series of Switches also come with either Intrinsically Safe or Flameproof approvals for use in Zone 0 or Zone 1 hazardous areas respectively.
The model CS2 and CS4 Presure Switches are suitable for setpoints between 0.25bar and 700bar with maximum working pressures up to 1000bar. (EAC certification is available on request).
-
S30 Differential Pressure Switch – Industrial Series
High performance on control or alarm applicationsS30 Differential Pressure Switch – Industrial Series
This robust pressure switch is suitable for a range of industrial applications, such as resistance to chemical attack or for use in corrosive atmospheres. The S30 Differential Pressure Switch is suitable for setpoints between -12.5mbar and 10bar with maximum working pressures up to 110 bar. This switch comes in models S31 and S34 (EAC certification is available on request).
Key Features
• Weatherproof and Flameproof models ATEX and NEC 500
• NACE MR-01-75 compatibility
• Ranges available up to 700 bar (10,000 psi) – Maximum working pressure up to 1000 bar (15,000 psi)
• Field set point adjustment against a reference scale
• Hermetically sealed microswitch options
• Optional gold alloy contacts
• Terminal block for easy field wiring
• Safety vented design as standard
• PED 2014/68/EU CAT IV option -
GR7 Temperature Switches – Compact Series
Reduced space applications, flying leads or junction box installationGR7 Temperature Switches – Compact Series
The GR7 Temperature Switch provides users with a compact, robust and hermetically sealed switch for use in safe and hazardous areas. This makes them particularly suitable for panel mounting in harsh environments. This product comes with a rigid or semi-rigid thermal system and is suitable for setpoints between -40°C and +350°C, with a maximum working temperature of up to 360°C (EAC certification is available on request).
Key Features
- Compact and rugged design
- Weatherproof IP66/NEMA 4
- ATEX Flameproof CENELEC Ex d IIC option
- ATEX Intrinsically Safe ATEX Ex ia IIC option.
- Stainless steel body option NEMA 4X rating
- Optional weatherproof, ATEX Ex e, ATEX Ex ia or ATEX
- Flameproof Ex d IIC terminal enclosures.
- 316 Stainless steel capillary and bulb.
- Ranges available up to 350°C (660°F)
- Maximum working temperature up to 360°C (680°F)
- Field adjustable.
- Hermetically sealed snap switch CSA listed.
