Steam & Water
Showing all 2 results
-
Suspended Solids Monitoring – MSM400
On/Off and continuous monitoring of suspended solidsSuspended Solids Monitoring – MSM400
The Delta Mobrey MSM400 system continuously measures the suspended solids within sludges or slurries. Many years of practical experience have shown that measurement of ultrasonic attenuation in a slurry is directly proportional to the percentage of suspended solids. The MSM400 system uses this principle to give a digital display and continuous output of the suspended solids measurement.
Commonly used in waste water treatment, industrial and mining plants and suitable for a wide range of fluids such as effluent, limestone slurry and China clay. Applications include sludge blanket measurement and detection, and slurry density control. The MSM400 controller is used with ultrasonic gap sensors available for either tank or pipe installation with a range of gap sizes to suit the application.
-
MCU200 Suspended Solids Detection Switch
Mobrey ControllerMCU200 Suspended Solids Detection Switch
The MCU controller and gap sensor when used together provide an ultrasonic point level liquid switch. Typical applications include sludge blanket level detection in settlement tanks, interface detection for immiscible liquids and contamination detection, such as oil in water or water in oil. The MCU201 and MCU203 control units provide simple and economical control electronics for wall-mounting near a tank or pipeline containing a single ultrasonic gap sensor. The sensors operate on the attenuation of an ultrasonic signal through the fluid.
Related products
-
D33 Differential Pressure Transmitter – D-Series
HART Communication, stainless steel enclosure suite for all applicationsD33 Differential Pressure Transmitter – D-Series
The D33 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specifically selected type of manometric liquid. The casing is made of cast aluminium alloy or 316 stainless steel with IP66/67 protection. The design of the casing enables the rotation of the casing by 0-355° relative to the sensor, and a choice of cable direction. The model D33 Differential Pressure Transmitter is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar.
Key Features
- Accuracy +-0.1%
- 4-20mA output signal
- Fully HART ® compatible
- Static pressure limit up to 420 bar
- ATEX certified (Intrinsically Safe)
- Gold plated diaphragm option
- Hastelloy C276 wetted parts option
-
387 Analogue Pressure Transmitter
Designed for heavy duty applications387 Analogue Pressure Transmitter
The Delta Mobrey 387 pressure transmitter has a compact, robust, all stainless steel construction making it particularly suited to the harsh corrosive environments of offshore applications. It also offers excellent accuracy of 0.15% of the upper range value, including combined effects of linearity, hysteresis and repeatability,
Product applications
The 387 is suitable for a wide range of applications in many industry sectors:
- Oil & Gas
- Chemical
- Petrochemical
- Water
- Power
