Search results: “manifold”
Showing all 3 results
-
Hydratect 2462 System
Conductivity Probe Steam and Water DetectionHydratect 2462 System
Hydrotect is an electronic alternative to conventional water level switches for steam-raising plants. Hydratect can be used in a wide variety of situations, wherever the detection of water or steam is vital for a plant’s safe and efficient operation.
The Hydratect 2462 control unit provides signal processing for two electrodes. Each channel monitors the status of its associated electrode. Four conductors are used between the control unit and each electrode so it can differentiate between steam, water, short-circuit, and open-circuit. A green LED indicates water, a red LED indicates steam and an amber LED indicates a fault condition. Each channel has a status relay to indicate water or steam, and a fault relay that will de-energise on a fault condition. The two channels are completely independent having separate power supplies, signal processing, and fault detection. The relay outputs can be externally wired for a ‘one out of two’ or ‘two out of two’ tripping scheme.
A Hydratect 2462 system consists of electrodes fitted into inserts and welded into the pipe work. Alternatively, manifolds can be supplied to technical drawings with inserts already in place. Electrodes are protected by covers. A military specification high-temperature cable connects each electrode to the Hydratect control unit.
A typical application to ensure TWIP (Turbine Water Induction Protection) is condensate level detection in drain pots (condensate pots).
Hydratect can be used to give compliance with ASME TDP-1, Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fuelled Plants.
-
D32 Analogue Differential Pressure Transmitter – D Series
Basic, low cost and robustD32 Analogue Differential Pressure Transmitter – D Series
The D32 Differential Pressure Transmitters is a cost effective solution for the measurement of differential pressure of gases, vapours and liquids. The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid.
The process connection to mount directly on to a 3 or 5 valve manifold, and also available is several type of chemical seals to measure any type of process fluid and condition.
Key Features
- Accuracy ±0.25%
- 4-20mA output signal
- Static pressure limit up to 420 bar
- Gold plated diaphragm option, suitable for hydrogen based applications
- Hastelloy C276 wetted parts option
- Intrinsic safety certificate (ATEX, IECEx)
-
Needle Valves, 2, 3 and 5 Ways
Direct and Remote V Series
Related products
-
301 Differential Pressure Switch – Performance Series
High performance on control or alarm applications301 Differential Pressure Switch – Performance Series
The Performance Series differential pressure switches utilise a stainless steel diaphragm based sensor. This, when coupled with a precision stainless steel mechanism designed to minimise friction in the moving parts, helps deliver the market leading performance customers have come to expect from the series. The model 301 Differential Pressure Switch is suitable for setpoints between -12.5mbar and 15bar with maximum working pressures up to 110bar. Also available in models 303, 304 and 381 (EAC certification is available on request).
Key Features
• Precision stainless steel mechanism for arduous atmospheres and high humidity
• Set point adjustable over whole range against calibrated scale with tamperproof adjuster
• Weatherproof and Flameproof models ATEX and IECEx
• Safety vented or blow out device as standard
• NACE MR-01-75 compatibility
• Hermetically sealed microswitch option
• Models for fixed switching differential, adjustable differential and HI-LO operation
• Ranges available up to 15 bar (200 psi), static pressure up to 250 bar (3500 psi)
-
DPT-2000 SMART HART Temperature Transmitter – D-series
Pt100 or Thermocouple integral sensorDPT-2000 SMART HART Temperature Transmitter – D-series
The DPT-2000 Temperature Transmitter is suitable for measuring temperatures between -200°C and 550°C, and comes with custom probe lengths and various thermowell options. With a high level of accuracy of ±0.075% across all sensors, this product can be utilised in multiple industries where a large range of temperatures are possible. This product has been successful in the Oil and Gas, Petrochemical, Power and Water industries.
Key Features- High accuracy ±0.075%
- 4-20mA analogue with digital communications
- Fully HART ® compatible
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- ATEX certified (Intrinsic Safety, Flameproof)
-
D21 Smart HART Pressure Transmitter – D-Series
Aluminium or stainless steel enclosure - all industry applicationsD21 Smart HART Pressure Transmitter – D-Series
The D-Series pressure transmitters offer customers reliable and accurate solutions to their individual process requirements. This product has a wide range of process connections and is easily configurable via the D-Soft software. The D-Series can be used for a variety of applications when pressure, differential pressure, temperature, level or flow measurements are needed. The D21 Pressure Transmitter is suitable for measuring pressures from -1 to 1000bar with maximum working pressures up to 1200bar. It is intrinsically safe and flameproof, and ATEX and IECEx rated, giving users confidence in aggressive environments.
- SIL 2 certificate
- Compliant to NAMUR NE-43
- High accuracy ±0.075% (better accuracy upon request)
- Fully HART ® compatible
- Static pressure limit up to 1200 bar
- 4-20mA, 0-20mA or 0-5mA analogue with digital communications
- Gold (Au) plated diaphragm option
- Hastelloy C276 wetted part option
- Programmable range, zero shift, characteristic and damping ratio with local panel keys
- Lightweight
- Linearisation of output signal on 20 point curve for specific application is available
- Write protection option through D-COMM communicator, ‘D-Soft’ program or software using library EDDL
- ECAS Certified (Emirates Conformity Assessment Scheme)
-
131 Flow Switch – Performance Series
Control and alarm applications, designed for HVAC131 Flow Switch – Performance Series
This Vane Operated Flow Switch is designed to provide protection and control in ducted air systems with flammable atmospheres making it suitable for traditional industries such as Oil and Gas; Chemical, Petrochemical and Refining where it works best in temperatures ranging from 0 -60C.
Key Features
• Air Flow.
• 2.5 to 12.5 m/sec.
• 500 to 2500 ft/min
• ATEX and IECEx.
