Products | Delta Mobrey

D32 Analogue Differential Pressure Transmitter – D Series

Marketing — Thu, 05 Dec 2024 16:50:00 +0000

D32 Analogue Differential Pressure Transmitter – D Series

The D32 Differential Pressure Transmitters is a cost effective solution for the measurement of differential pressure of gases, vapours and liquids.

The active sensing element is a piezoresistive silicon sensor separated from the medium by a diaphragm and by a specially selected type of manometric liquid.

The process connection to mount directly on to a 3 or 5 valve manifold, and also available is several type of chemical seals to measure any type of process fluid and condition.

The post D32 Analogue Differential Pressure Transmitter – D Series appeared first on Delta Mobrey.

Single or double contact for pressure and temperature gauges

Marketing — Tue, 27 Feb 2024 07:48:33 +0000

The post Single or double contact for pressure and temperature gauges appeared first on Delta Mobrey.

CP Pressure Gauge

Marketing — Tue, 27 Feb 2024 07:21:22 +0000

Manufactured in stainless steel within the EU, in accordance with EN837 standards. This product is designed for use in corrosive environments and is resistant to chemical attack. The standard capsule material is stainless steel, AISI 316. The CP capsule type pressure gauges are suitable for a wide range of low pressure applications in industries such as oil and gas, chemical, petrochemical, refining, power and marine, on dry and clean gasses, air, and exhaust gasses from chimneys.

Key Features

Degree of Protection IP55
Nominal Diameter of 100 & 150 mm
Stainless steel enclosure as standard
Blowout Protection

The post CP Pressure Gauge appeared first on Delta Mobrey.

Vibrating Fork Level Switch for Solids and Liquids – DMS & DMT

Marketing — Fri, 09 Feb 2024 08:02:02 +0000

The Vibrating Fork Level Switch (DMS & DMT series) is the perfect completion of Delta Mobrey's range of level detection solutions. This instrument completes the range of products for the control of level in tank, silos and pump protection. Solid products like grains or aggregate can be controlled with the Vibrating Rod (VLS), and the application can be expanded to granules and powders with the Vibrating Fork series.

The same is also available for the controls of liquids, in combination with the Ultrasonic series 003 and all the mechanical float types.

The vibrating forks are energized and kept in resonance by an electronic circuit. When covered by material, the damping of the vibration is detected by the electronics, which switch the output relay after a configurable time delay. The vibrating fork level switch is the perfect solution for single point level switching in free flowing solids and liquids across a wide density range, covering all the needs from industrial applications to the compactness requirements typical of the applications on machines.

Key Features

Configurable action
Threaded or flanged connection
Side or top mounting
Compact and mini construction available
Robust aluminium housing
IP67 ingress protection
AC or DC supply voltages
ATEX approved

The post Vibrating Fork Level Switch for Solids and Liquids – DMS & DMT appeared first on Delta Mobrey.

Electrodes

Marketing — Tue, 13 Sep 2022 10:47:29 +0000

Electrodes are at the heart of our Hydrastep and Hydratect system.

As well as being essential to the measurement of water and steam, they are also incredibly durable and reliable.

This is due to their specific design, as each electrode is handcrafted and tested to withstand both extreme pressures and temperatures. As a result they can endure harsh conditions for many years (even decades), ensuring that your plant will continue to operate safely and consistently.

View a video about our electrodes.

The post Electrodes appeared first on Delta Mobrey.

DMCU800 – Programmable Controller

Marketing — Thu, 21 Jul 2022 08:17:21 +0000

The DMCU800 controller accepts a range of inputs including 4-20mA and thermocouples. Values are displayed on its clear LED screen. It is fully configurable via the push button controls. Outputs are 4-20mA and 5 relays for control or alarms. A programmable look up table means it can be used on non-linear shaped tanks to give volumetric measurements. The controller is available in both panel mount and IP65 wall mount versions with options for 24Vdc or 110/220Vac supplies. Typical applications are for use with the Delta Mobrey series of 9700 pressure transmitters or the DMSP422 level transmitters.

The post DMCU800 – Programmable Controller appeared first on Delta Mobrey.

Level Gauges

Marketing — Mon, 11 Jul 2022 10:16:47 +0000

These level gauges provide high reliability for use in steam and process applications, specifically saturated steam, hot water and aggressive fluids.

These are available in either Glass Tube, Reflex or Transparent Types and have been used in industrial boilers and chemical aggressive media.

Made from borosilicate glass with spare shut off valves available.

The post Level Gauges appeared first on Delta Mobrey.

Cooling Tower

Marketing — Mon, 07 Feb 2022 08:28:43 +0000

Delta Mobrey's Cooling Towers are a simple device designed to allow for pressure instruments to operate at excessive temperatures.

The post Cooling Tower appeared first on Delta Mobrey.

D45 SMART Level Transmitter – D Series

Marketing — Wed, 21 Jul 2021 10:36:31 +0000

The D45 Smart Level Transmitter is a probe most suited for measuring the level in pressurised tanks. It is compact yet robust, and is categorised as flameproof and intrinsically safe all with high accuracy. Equipped with a fully welded sensor which guarantees tightness for oil systems, even over long term use.

This probe can be used with a wide range of connections, making it versatile, and is easily configurable with the D-Software.

This digital product is part of a family of SMART transmitters, but this one is most beneficial where there is no external access to a tank.

Key Features

• ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe

• High accuracy ±0.16% • Fully HART ® compatible

• 4-20mA analogue with digital communications

• Fully welded sensor guarantees tightness of oil systems for long term usage

• Programmable range, zero shift, characteristic and damping ratio with local panel keys

The post D45 SMART Level Transmitter – D Series appeared first on Delta Mobrey.

Pressure Instrument Accessories

Marketing — Wed, 05 May 2021 07:49:21 +0000

Delta Mobrey's Accessories are all made from a Stainless Steel construction with the option of an exotic material. Providing full protection for the instruments and special signal output.

The post Pressure Instrument Accessories appeared first on Delta Mobrey.

Thermowells

Marketing — Tue, 04 May 2021 13:55:48 +0000

Thermowells are used to protect the sensing element of the temperature instrument from corrosion, abrasion and high pressures. They allow the measuring instrument to be removed for recalibration or replacement, without interrupting the flow or stopping the process.

The bar stock thermowells are available in parallel, tapered or step manufactured variations as required. We offer a large number of customised thermowell designs or materials, to meet the specific requirements of customers. High accuracy and quality of production is an important aspect for our thermowells.

Key Features

Solid bar stock construction or machined from a pipe
1 piece, forged construction available
Different materials available or covered with PTFE
Full penetration welds
Flanges according to ANSI, DIN standard
ASME PTC 19.3 Stress calculation available
Stop Ring available in case of need
Special and customized construction

The post Thermowells appeared first on Delta Mobrey.

Flow Element Series

Marketing — Fri, 12 Mar 2021 16:44:35 +0000

The most simple and economic method for a flow measurement of liquids or gases, in either compact or standard sizes, dependening upon the application required. A complete system ready for flow measurement with Pressure and Temperature compensation.

The elements which make up the flow and measurement set are constructed according to ANSI, B16.5/ISO 51

Key Features

• Standard construction material: Carbon Steel, Stainless
Steel. Wide range of exotic material is available according
to the application requirements
• Rating ANSI 300, 600, 900, 1500 or DIN starting from PN6.
• Manufactured from forged piece and completely machined
with fine and uniform tool finish
• Standard 2+2 ½”NPTF pressure taps with plugs at 180° for
universal application on liquid or gasses
• Orifice plate with handle as standard
• Jack screw supplied as standard
• Calculation sheet, dimensional drawing and materials certificates are supplied with the elements as standard
• Flow direction marked when required

The post Flow Element Series appeared first on Delta Mobrey.