Delta Mobrey | Accessories | Process Instrumentation

Single or double contact for pressure and temperature gauges

Marketing — Tue, 27 Feb 2024 07:48:33 +0000

The post Single or double contact for pressure and temperature gauges appeared first on Delta Mobrey.

DMCU800 – Programmable Controller

Marketing — Thu, 21 Jul 2022 08:17:21 +0000

The DMCU800 controller accepts a range of inputs including 4-20mA and thermocouples. Values are displayed on its clear LED screen. It is fully configurable via the push button controls. Outputs are 4-20mA and 5 relays for control or alarms. A programmable look up table means it can be used on non-linear shaped tanks to give volumetric measurements. The controller is available in both panel mount and IP65 wall mount versions with options for 24Vdc or 110/220Vac supplies. Typical applications are for use with the Delta Mobrey series of 9700 pressure transmitters or the DMSP422 level transmitters.

The post DMCU800 – Programmable Controller appeared first on Delta Mobrey.

Cooling Tower

Marketing — Mon, 07 Feb 2022 08:28:43 +0000

Delta Mobrey's Cooling Towers are a simple device designed to allow for pressure instruments to operate at excessive temperatures.

The post Cooling Tower appeared first on Delta Mobrey.

Pressure Instrument Accessories

Marketing — Wed, 05 May 2021 07:49:21 +0000

Delta Mobrey's Accessories are all made from a Stainless Steel construction with the option of an exotic material. Providing full protection for the instruments and special signal output.

The post Pressure Instrument Accessories appeared first on Delta Mobrey.

Thermowells

Marketing — Tue, 04 May 2021 13:55:48 +0000

Thermowells are used to protect the sensing element of the temperature instrument from corrosion, abrasion and high pressures. They allow the measuring instrument to be removed for recalibration or replacement, without interrupting the flow or stopping the process.

The bar stock thermowells are available in parallel, tapered or step manufactured variations as required. We offer a large number of customised thermowell designs or materials, to meet the specific requirements of customers. High accuracy and quality of production is an important aspect for our thermowells.

Key Features

Solid bar stock construction or machined from a pipe
1 piece, forged construction available
Different materials available or covered with PTFE
Full penetration welds
Flanges according to ANSI, DIN standard
ASME PTC 19.3 Stress calculation available
Stop Ring available in case of need
Special and customized construction

The post Thermowells appeared first on Delta Mobrey.

D-COMM Handheld Communicator

Marketing — Tue, 17 Mar 2020 14:52:12 +0000

Identification of a transmitter.
Configuration of its output parameters.
Reading of a PV value (e.g. pressure, output current, degree of output setting in %).
Enforcement of output current with a given value.
Transmitter calibration in relation to master pressure.
Function linearization (user characteristic creator).
Zeroing.

The post D-COMM Handheld Communicator appeared first on Delta Mobrey.

Diaphragm Seals for Pressure Instruments

Marketing — Wed, 18 Jan 2017 06:02:52 +0000

The D-Series range of Diaphragm Seals are applicable only to D-Series products DPR-2000, DPR-2000G, DPR-2200 and DPC-2000.

The model S-P diaphragm seals have a flush diaphragm and are made from 316 stainless steel for a wide range of general applications.

The model S-Ch diaphragm seals have a flush diaphragm and are available in a range of exotic materials for corrosion resistance.

The model S-T diaphragm seals (see picture above) have an extended diaphragm are typically applied to measure the pressure or level of the media in a multi-walled tank.

The S-Mazut diaphragm seals is applicable to measurement of viscous liquids, at temperatures up to 150°C (300°C when remote diaphragm seal is used).

The post Diaphragm Seals for Pressure Instruments appeared first on Delta Mobrey.

Needle Valves, 2, 3 and 5 Ways

Marketing — Tue, 17 Jan 2017 06:50:50 +0000

Delta Mobrey has expanded its’ process control instrumentation portfolio by introducing a
complementary range of valves and manifolds. Ideal for use in conjunction with Delta’s pressure and
temperature switches or pressure transmitters, these robust accessories are the perfect solution for
even the most demanding applications.

Metal to metal body bonnet seal for high pressure and high temperature sealing
Unique non-rotating hardened tips – field interchangeable
316 stainless steel trim
A 316 stainless steel pin eliminates unauthorised removal of bonnet assy.
Materials of construction can be supplied to meet the requirements of NACE MR-01-75
Bubble tight metal to metal seat for positive shut off
Full material traceability of major components
Positive no slack stem action
100% Hydrostatic testing

The post Needle Valves, 2, 3 and 5 Ways appeared first on Delta Mobrey.